Biconical Elements, 30-300 MHz, requires VHA 9103 B, VHBC, VHBB or VHBA

Biconical Elements, 20-200 MHz, requires VHA 9103 B, VHBC, VHBB or VHBA

Biconical Elements, 45-450 MHz broad band, requires VHA 9103, VHBB or VHBA

Biconical Elements, 60-600 MHz broad band, requires VHA 9103, VHBB or

VHBA

Biconical Elements, (30)100-1000 MHz (like VUBA), for UBAA 9114/9115

Biconical Elements, 30-1000 MHz broad band (like UBA), for UBAA 9114/9115

Biconical Elements, 30-1000 MHz for EFS 9218

 

Foldable elements for immunity for automotive applications, optimized for 1 m measurement distance, max. diameter 150 cm, 20-220 MHz suitable for: VHBC 9133, VHBD 9134, VHBD 9134-4. Balun must be equipped with “HOLDER SHORT”!

Plastic holders to be fixed at a high power balun e.g. VHBA 9123, VHBC 9133, VHBD 9134, VHBD 9134-4. BBAE 9179 elements cause torque in horizontal

polarisation to the fixture at the balun. HOLDER SHORT absorbs the torque caused by BBAE 9179 in horizontal polarisation.

Large collapsible aluminium Elements with extensions up to 4 m

Collapsible Biconical Elements 30 – 300 MHz (instead of BBA)

Large Collapsible Biconical Elements 20 – 200 MHz (instead of BBAL)

Open Conical Elements, 160-1200 MHz broad band, for UBAA 9114/9115

Open Conical Elements, (30)100-1000 MHz broad band, for UBAA 9114/9115

Set of pluggable coils with 10 mm element fixtures and 10 mm shafts. A pair of coils is added between the high power balun and the antenna element. Suitable for the following baluns: VHBA 9123, VHBC 9133, VHBD 9134, VHBD 9134-4. Suitable for the following elements: BBA 9106, BBAL 9136, BBFA 9146,

BBAE 9179 and others. The booster coils have 5 turns and increase the gain of the biconical antenna in the lower frequency range remarkably. If the coils are used with BBAE 9179 the balun must be equipped with additional torque absorb- ing plastic fixation bar (holder long). (Also available: 4 turns = …4W and 3 turns

= …3W)

Plastic holders to be fixed at a high power balun e.g. VHBA 9123, VHBC 9133,VHBD 9134, VHBD 9134-4. The HOLDER LONG must be assembled to the balun to use BBAE 9179 with booster coils.