Sign in
|
Antenna Masts / Tripods / Adapters
|
AM BBHA 9120 K
|
Antenna Mast System for the BBHA 9120 K horn antenna, manual height scan- ning 1.0 m to 1.8 m, polarization and tilting continuously adjustable.
|
AM 9104
|
Detachable Antenna Mast System (glass-fibre tubing) for VHF-UHF Antennas, manual height scanning 0.4 m to 4 m, insulated mast and antenna box with 0°/90° detents, zinc-plated / stainless steel 3-leg mast foot.
|
AM 9104 GF
|
Detachable Antenna Mast System (glass-fibre tubing) for VHF-UHF Antennas, manual height scanning 0.4 m to 4 m, insulated mast and antenna box with 0°/90° detents, 3-leg mast foot made of glass fiber.
|
Opt. 9104
wheels
|
Option: Caster Wheels and Brakes for zinc-plated / stainless steel 3-leg mast foot
|
AM 9144 T-05
|
Glass fiber telescopes for antenna tripod/mast AM 9144, height range adjustable by screw 510-940mm, 3/8“-thread on top, 55mm shaft to be inserted into a mast foot
|
AM 9144 T-08
|
Glass fiber telescopes for antenna tripod/mast AM 9144, height range adjustable
by screw 700-1300mm, 3/8“-thread on top, 55mm shaft to be inserted into a mast foot
|
AM 9144 T-09
|
Glass fiber telescopes for antenna tripod/mast AM 9144, height range adjustable
by screw 800-1510mm, 3/8“-thread on top, 55mm shaft to be inserted into a mast foot
|
AM 9144 T-12
|
Glass fiber telescopes for antenna tripod/mast AM 9144, height range adjustable by screw 1050-1950mm, 3/8“-thread on top, 55mm shaft to be inserted into a
mast foot
|
AM 9144 M-
VA
|
Robust 3-leg-mastfoot made of stainless steel with 55mm-inlet
|
AM 9144 M-
GFK
|
Low reflective 3-leg-mastfoot made of glass fiber reinforced plastics with 55 mm- inlet
|
AM 9144 M-
TILT
|
Modification of stainless steel mast foot for AM 9144 with 0-20 degrees tilt func- tion by hand wheel.
|
AM 9144 W-
VA
|
Caster wheels and brakes for stainless foot AM 9144 M-VA
|
AM 9144 W-
GFK
|
Caster wheels and brakes for GF-foot AM 9144 M-GFK
|
AM 9144 E-05
|
Accessory for AM 9144: extender rod with 3/8'' thread male on top and 3/8'' thread female on bottom. Allows to extend by a fixed length. Length: 430mm
|
AM 9144 E-08
|
Accessory for AM 9144: extender rod with 3/8'' thread male on top and 3/8''
thread female on bottom. Allows to extend by a fixed length. Length: 600mm
|
AM 9144 E-09
|
Accessory for AM 9144: extender rod with 3/8'' thread male on top and 3/8'' thread female on bottom. Allows to extend by a fixed length. Length: 710mm
|
AM 9144 E-12
|
Accessory for AM 9144: extender rod with 3/8'' thread male on top and 3/8'' thread female on bottom. Allows to extend by a fixed length. Length: 900mm
|
AA 9202
|
Mast Adapter for AM 9144 with 22 mm hole for most Antenna models, 3/8” and
1/4” camera threads, polarisation continuously adjustable.
|
AA 9202 POM
|
Non metallic mast adapter for most light weight Antenna models with 22 mm tube, minimizes reflections, 3/8” camera thread, polarisation continuously adjust- able.
|
AA 9203
|
Mast Adapter for AM 9144 with 22 mm hole for most Antenna models, 3/8” and
1/4” camera threads polarisation and elevation continuously adjustable
|
AA 9205
|
Orthogonal Swivel Adapter for positioning in 3 perpendicular directions. Applica- tion: determination of the magnitude of the fieldstrength
|
AA 9209
|
Antenna adapter to fix STLP 9128 E, STLP 9128 E special, STLP 9128 D, STLP 9128 D special on AM 9144. Alllows antenna rotation without height adjustment. Antenna can be fixed in the center of gravity without any collision with the AM 9144 during polarisation change.
|
AA 9213
|
Adapter to convert a 3/8’’ female thread to 22 mm tube, e.g. to fix BBHA 9170 on
AM 9104.
|
RS 9214
|
Adapter to convert the R&S Aluminium Flange into 22 mm tube with indexing ring.
|
RA 9215
|
Indexing adapter for fast & precise polarisation change.
|
R&S Flange
|
R&S Flange for Schwarzbeck antenna with 22 mm tube.
|
KG 9201
|
Mast Adapter (swivel, 90° vertical/horizontal polarisation for AM 9144), for VULP 9118 D,E,F,G and VUSLP 9111 E only
|
PPS 9208
|
Pneumatic polarisation shifter with 2-way pneumatic cylinder for all Schwarzbeck
antennas with 22 mm tube on AM 9144. Compressed air required.
|
PDG 9211
|
Polarisation changer jig for large horn antennas. Allows easy polarisation change of large horn antennas on AM 9144. Connection to AM 9144: 3/8'' female thread. Antenna will be held close to center of gravity. Polarisation change by rotating
along circular metal curve by one single person without any height offset.
|
Opt. 9211 PN
|
Additional option for PDG 9211: polarisation change with pneumatic cylinder and 12V valve 5/2 ways.
|
Opt. 9211 J
|
Specific accessories to fix BBHA 9120 J to PDG 9211. (rotating ring, braces, short central tube, fixture materials). If ordered together with the antenna we will
fix everything before shipment.
|
Opt. 9211 F
|
Specific accessories to fix BBHA 9120 F to PDG 9211. (rotating ring, braces, short central tube, fixture materials). If ordered together with the antenna we will fix everything before shipment.
|
Opt. 9211 G
|
Specific accessories to fix BBHA 9120 G to PDG 9211. (rotating ring, braces,
short central tube, fixture materials). If ordered together with the antenna we will fix everything before shipment.
|
Opt. 9211
9251-24
|
Specific accessories to fix HA 9251-24 to PDG 9211. (rotating ring, braces, short central tube, fixture materials). If ordered together with the antenna we will fix
everything before shipment.
|
SWHA 9204
|
Swivel handle for light antennas
|
EA 9207
|
Adapter for Schwarzbeck antennas with 22 mm tube on EMCO mast.
|
TA 9204
|
Thread Adapter with 3/8" female and 1/4" male threads. Mainly for American antenna brands.
|
TA 9205
|
Thread Adapter with 1/4" female and 3/8" male threads. (For camera tripods, not for AM 9144)
|
TA 9206
|
Thread Adapter with 3/8" female and 5/8" male threads. (Geodesy)
|
POSITIONER
|
Positioner for light weight antennas like SBA 9113 with 420 NJ. The positioner consists of: 1 piece of glass fiber tube 22 mm thick, 1000 mm long, an adapter AA 9203 is mounted to the tube. The other end of the tube carries a 3/8 inch male camera thread.
|
CABLE
GUIDE
|
Holder to guide the antenna´s cable parallel to the POSITIONER at a distance of 50 cm. Ideal for the SBA 9113 + 420 NJ and the SBA 9119 + 422NJ antennas.
|
RRAH 9286
|
Antenna holder for antennas with 22mm tube to be fixed at car roof railing or car roof rack.
|
TWAD 9220
|
Twin adapter to mount two antennas equipped with 22 mm diameter tube. The TWAD 9220 allows to position the antennas in a broad combination of distances
and angles.
|